Bodine Stepper motors
Selection Features:
•
Suitable for unipolar L/R and chopper, bipolar L/R and chopper, and
bi-voltage drive schemes—for a wide selection of controls
• Class F
insulation system for longer winding life than competitive products
•
Available in single or dual shaft models, for attaching encoders
•
Locked shaft bearing for minimal endplay
• Mechanically and
electrically compatible with many competitive motors
• High output
torque per frame
Application Information:
• IP-40 Standard
mounting
• Flange mounting
• 8 leads plus ground lead, 12 in. long,
on 23T and 34T
• 8 leads, 15.2 cm long, with ground screw on 42T
•
Permanent grease in ball bearings
• ¨ = B for 1 shaft, F for 2 shafts
| Type | Rotor
Inertia (Oz-in-s²) |
Radial
Load (lbs.) |
Axial
Load (lbs.) |
XH | XL | AH | U | Lbs. |
|---|---|---|---|---|---|---|---|---|
| 23T1 | 1.50 | 15 | 25 | 2.43 | .697 | 1.6 | ||
| 23T2 | 3.0 | 15 | 25 | 3.43 | 1.697 | 2.5 | ||
| 23T3 | 4.50 | 15 | 25 | 4.43 | 2.697 | 3.3 |
Selection Table
shaft |
Shaft |
2ų/1ų |
Min. Holding |
Min. Holding |
Torque | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Connection Diagram 074-10093 - 8 leads plus ground lead | ||||||||||
| 2430 | 2530 | 23T1¨EHD | 1.8/2.1 | 1.3 | 3.8 | .34 | .65 | 50 | 30 | 2.3 |
| 2409 | 2509 | 23T1¨EHH | 2.3/2.3 | 4.8 | 1.0 | 4.80 | 9.52 | 50 | 30 | 2.3 |
| 2431 | 2531 | 23T2¨EHD | 1.8/2.2 | 1.7 | 4.7 | .36 | .88 | 100 | 60 | 2.5 |
| 2410 | 2510 | 23T2¨EHH | 2.6/2.6 | 5.1 | 1.6 | 3.20 | 8.26 | 100 | 60 | 2.5 |
| 2432 | 2532 | 23T3¨EHD | 2.1/2.2 | 2.3 | 4.6 | .50 | 1.32 | 150 | 90 | 4.0 |
| 2411 | 2511 | 23T3¨EHH | 2.3/2.3 | 3.4 | 2.9 | 1.18 | 3.14 | 150 | 90 | 4.0 |
| 2433 | 2533 | 34T1¨EHD | 1.6/3.0 | 1.7 | 4.7 | .35 | 1.63 | 150 | 90 | 4.5 |