 |
|
|
| |
|
|
|
Proto-Board Station
Proto-Board Station
- 2500 tie points
- Function Generator
- Logic indicators
- Triple power supply
This station combines a breadboarding system
with the most frequently used circuit components and
allows you to eliminate repetitive building of redundant
circuits. It includes a removable solderless breadboard
of 2500 tie points, a function generator, a triple power
supply, high and low buffered logic indicators,
potentiometers, pushbuttons, switches and connectors.
Operates at 115V, measures 13" x 11-1/2" x 6", and
weighs 7 lbs. |
 |
|
| Model PB503 Specifications |
| Output. |
| Fixed DC output: +5V @ 1.0A Variable DC
output: +5V to 15V @0.5A. Variable DC output: -5
to -15V @ 0.5A |
| Function Generator. |
| Frequency range: 0.1 Hz to 100KHz
Output voltage: 0 to ±10V (20V, P-P). Output
waveforms: sine, square, triangle, TTL. Output
impedance: 600 ohms (except TTL). Output current:
10mA maximum, short circuit protected. |
| Logic Indicators. |
| Eight LEDs active high, 1.4 volt
(nominal) threshold, input protected to ±20
volts. |
| Debounced Pushbuttons. |
| (Pulsers) Two push-button,
open-collector output pulsers, each with one
normally open, one normally closed output. Each
output can sink up to 250mA |
| Potentiometers. |
| One 1k ohm, one 10k ohm, all leads
available and uncommitted. |
| BNC Connectors. |
| Two BNC connectors, pin and shell
available and uncommitted. |
| Switches. |
| Two SPDT slide switches, all leads
available and uncommitted. 8-pole DIP switch: one
side of all eight switches separate, available and
uncommitted. | |
|
Back |
|
|
| |
|